Installation instructions, Your sales receipt, Installation – Lenoxx Electronics PH-600 User Manual

Page 4: Ringer on/off switch, Tone/pulse switch

Advertising
background image

Congratulations for purchasing a Lenoxx Sound telephone. Some of the features of

the PH-600, BP-600 and BP-601 are:

LAST NUMBER REDIAL - Useful if line is busy.

DESK OR WALL MOUNTABLE - No special hardware needed.

TONE/PULSE SWITCHABLE - Select the desired dialing mode.

ADJUSTABLE HANDSET VOLUME CONTROL - Adjusts and raises volume of

receiver.

FLASH BUTTON - For alternate pay service such as call waiting or getting a new dial

tone quickly.

FULLY MODULAR JACKS - For easy plug-in installation.

REVERSIBLE HANDSET HOLDER FOR WALL USE - Holds Handset in up-right

position, if your phone is wall mounted.

YOUR SALES RECEIPT

You will need your sales receipt should you ever need warranty service. You should

also save the packing material if you want to move or ship this phone.

INSTALLATION INSTRUCTIONS

INSTALLATION

TELEPHONE BASE

HANDSET

STRAIGHT TELEPHONE CORD

To Telephone Jack

COILED HANDSET CORD

1. Insert the modular plugs of the Coiled Handset Cord into the jack of the Telephone

Handset and into the jack on the SIDE of the Telephone Base (either end can be

plugged in).

2. Insert the modular plugs of the Straight (not coiled) cord into the modular jack at the

TOP of the Telephone Base and into the Telephone Jack. (either end can be

plugged in ).

NOTE: To insure your phone is properly connected, lift Handset and listen for dial

tone.

RINGER ON/OFF SWITCH

ON - Normal setting, rings on incoming calls.

OFF - The ringer does not sound, for undisturbed privacy.

NOTE: If your Ringer Switch is in OFF position, only THIS phone will not ring, other

phones in your home on the same line will ring.

TONE/PULSE SWITCH

TONE - The phone will operate using tone dialing.

PULSE - The phone will dial using rotary dial type pulse.

NOTE: Even when your phone is set to pulse service, this phone can dial tones for

access to services that require tone sounds like computer systems or call
directors. Just press the Tone Button

after dialing in pulse and your

buttons can now be used for tone signaling for this call only. After you hang

up, the phone resets itself to pulse dialing.

PH-600082799 MS V.2

E

3

Advertising
This manual is related to the following products: