LG B2100 - Manual (Page 27)

warn you of an incoming call while you are already on a
call. A tone sounds in the earpiece and the display will
show that a second call is waiting. This feature, known
as C
Caallll w waaiittiinngg, is only available if your network
supports it. For details of how to activate and
deactivate it see C
Caallll w waaiittiinngg on page 49.
If C Caallll w waaiittiinngg is activated, you can put the first call
on hold and answer the second, by pressing or by
selecting left soft key, then H Ho olld d & & A Annssw weerr. You can
end the current call and answer the waiting call by
selecting left soft key and then EEnnd
d & & A Annssw weerr.
Rejecting an incoming call
You can reject an incoming call without answering by
simply pressing the
key.
During a call, you can reject an incoming call by
pressing the left soft key [Menu] and selecting the
Multiparty/Reject or by pressing the
key.
Muting the microphone
You can mute the microphone during a call by pressing
the left soft key [Options] then selecting M
Muuttee. When
the handset is muted, the caller cannot hear you, but
you can still hear them. The handset can be unmuted
by pressing the [Unmute].
Switching DTMF tones on during a call
To turn DTMF tones on during a call, press the left soft
key, and then select D
DT TM MFF on. DTMF tones can be
turned off the same way. DTMF tones allow your
phone to make use of an automated switchboard.
Multiparty or conference calls
The multiparty or conference service provides you with
the ability to have a simultaneous conversation with
more than one caller, if your network operator
supports this feature. A multiparty call can only be set
up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty call
is set up, calls can be added, disconnected or
separated (that is, removed from the multiparty call
but still connected to you) by the person who set up
the multiparty call. These options are all available from
the In-Call menu. The maximum callers in a multiparty
call are five. Once started, you are in control of the
multiparty call and only you can add callers to the
multiparty call.
General functions
General functions
26