Lenoxx Electronics CD-1095 - Manual (Page 14)

IB-CD1095(SY)-WM-E-031604
TROUBLE SHOOTING
Problem Remedy
The power is not on.
•
Connect the AC power cord to a wall
outlet securely.
•
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
Make sure the FUNCTION switch is at
the right position as you want.
•
Adjust the volume.
•
Unplug the headphones when listening
through speakers.
“ ” appears in the display
even when a CD is in place.
•
Insert the CD with the label side up.
CD does not play.
•
Make sure that the CD compartment is
closed.
•
Place the CD with the label side up.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
•
Make sure the FUNCTION switch is at CD
position.
•
Clean the CD, or replace it if the CD is
badly damaged.
•
Place the player in a location free from
vibration.
•
Check if your batteries are fresh.
The sound is weak or has
poor quality.
•
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
G
en
er
al
C
D
p
la
ye
r
R
ad
io
The sound drops out.
13
CD does not play while radio
may continue to play.
•
It is normal since the radio uses less power
than the CD player.
IB-CD1095(sy)-WM-E-031604.p65 3/18/2004, 2:11 PM 14