Lanier 5518 - Manual (Page 52)

System Settings
5 - 4 User Tools Settings
6. Auto Off Timer The machine turns itself off automatically to conserve
energy after your job is finished, after the selected
time.This function is called “Auto Off”.The time can be set
from 1 to 240 minutes.
Auto Off might not be effective when the machine is in the
following conditions:
• An error message is displayed.
• The remaining memory space for fax mode is less than
100%.
• When originals set in the document feeder.
To return to the ready condition from Auto Off, the
machine requires the same warm-up time as the time for
becoming ready after power is turned on.
When the machine receives a fax or printer data in Auto
Off mode, it automatically prints the fax or the printer data.
Default: 30 minutes
7. AOF (Keep It On.) For details of this function, contact your service
representative.
8. Special Paper Size Select the size of the copy paper set in the paper tray.
If the specified paper size differs from the size of paper
actually set in the paper tray, a paper misfeed might occur
because the paper size is not detected correctly.
The size of paper you can load in the LCT (Large Capacity
Tray) is fixed depending on your locale. However, if you
wish to switch from A4 to 8 1 /2”× 11"or vice-versa,
please contact your service representative.
9. Pap.Tray Priority (for
Copy mode only)
You can select the paper tray which will be selected as a
default in the following conditions:
• When the operation switch is turned on.
• When the Clear Modes key is pressed.
• When Auto Paper Select mode is not selected.
1: Tray 1
2: Tray 2
3: Tray 3 (Paper Bank)
4: Tray 4 (Paper Bank)
Tray 3 and Tray 4 are options.
Default: Tray 1
Menu Description