Linksys WPG54G - Manual (Page 18)

12 Chapter 4: Connecting the Presentation Player
Placement Options
Wireless-G Presentation Player
Placement Options
There are two ways to place the Player. You can place the Player horizontally on a surface, as shown in Figure 6-
1. (If necessary, adjust the antenna so that it points straight up in the air.) The second way is to stand the Player
vertically on a surface. If you want to install the stand, refer to the instructions below.
Installing the Stand for Vertical Placement
1. The Player includes four triangular stands. The Player has eight rubber inserts, four on each side.
2. Remove the two rubber inserts that are adjacent to the power port. Insert a stand into an opening, then push
it up to snap it into place. Then, insert a stand into the other opening, and push it up to snap it into place.
3. Repeat step 2 for the LED side of the Player.
4. Place the Player in an appropriate location.
5. If necessary, adjust the antenna so that it points straight up in the air. (See Figure 6-2.)
Figure 4-4: Horizontal Placement
Figure 4-5: Vertical Placement
Power Port
Rubber Insert
Stand