Lightolier Alter Metalyte QVS2GPTOS2FT - Manual (Page 2)

ORDERING INFORMATION
Explanation of Catalogue Number Example: QVS2GPTOS2FT120SB
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge
cold rolled steel. Optic - Semi-specular matte aluminum reflector with
lenghtwise ridges. Soft white acrylic film on inside of lamp shield conceals
lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL
QVS2GPTOS2FT
QVS
QUALITY
VISUAL
STATIC
2
FIXTURE
WIDTH
G
CEILING
TYPE
PT
LAMP
SHIELD
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH
120
VOLTAGE
120,277
347
SB
OPTIONS
Standard exposed
T-grid ceilings
(NOMINAL 24”)
FT = TT5
Bi-tube
R =Radio Interface Filter
O =Emergency Lighting
System (for Canada)
N =Emergency Lighting
System (for U.S.)
Recessed direct
indirect soft light
optical system
CLEAR POLISHED
ACRYLIC DROP
DOWN VISUAL ELEMENT
OS =Open slot (no acrylic)
OP =One Piece (no center slot)
GC =Clear acrylic
GG =Clear acrylic / Green projected color face
GB =Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
ALTER METALYTE
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
OS 2 FT
2’
PT=Metallic
Reflector /
Microperforated
Mesh
lamp shield
BALLAST
SB: 40W TT5 Elect.
BE: 50W TT5 Elect.
BD: 55W TT5 Elect.
PB: 40W TT5 PowerSpec HDF Dimming †
DA: iGEN DALI †
† Not available in 347V.
Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 - Tel. (508) 679-8131
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - (613) 938-6221