Lindy Switch - Manual (Page 30)
















Remote connection by VNC viewer
The VNC viewer is a compact application that runs on your remote system and
allows you to view and use the LINDY KVM IP and its host computer(s). VNC
viewer is readily available from a number of different sources:
• from the LINDY KVM IP installation CD
• from the
LINDY KVM IP itself
• from the RealVNC website
To connect using the VNC viewer
1 Locate and select the VNC viewer icon 
• If you are using a dial up link .
A connection details dialog will be displayed:
Remote connection by Web browser
You can use a standard Web browser ( supported versions ) to gain access to
the LINDY KVM IP and its host computer(s). As soon as you make contact with
the LINDY KVM IP it will begin downloading a small Java application to your
browser, which will be used only for the duration of your connection.
To connect using your Web browser
1 Launch your standard Web browser as usual.
• If you are using a dial up link .
2 In the Address section, type the address of the LINDY KVM IP as follows:
http://v.w.x.y
where v.w.x.y is the IP network address, for example 192.168.0.3
• If you have been asked to also enter a port number .
3 Press . A connection attempt will be made. In the browser window,
select the ‘Connect using built-in Java VNC viewer’ option to download
a small application that will temporarily empower your browser (on slow
connections the application download can take several tens of seconds to
complete). Once complete, a connection details dialog will be displayed:
2 In the ‘Server:’ entry, type the address of the LINDY KVM IP as follows:
v.w.x.y
where v.w.x.y is the IP network address, for example 192.168.0.3
• If you have been asked to also enter a port number .
3 Click the OK button. Depending on the options selected, you may need to
confirm certain items. A connection attempt will be made and if successful,
an authentication dialog should be displayed:
4 Enter your username and password. The viewer window should now open
and show the current host computer. Note: If the Username entry is blanked
out then only admin user account is currently defined and only a password is
required.
Options button
Provides a range of viewer and connection settings - MORE [+]
Enter the LINDY KVM IP
address here and click OK
The previously entered LINDY
KVM IP address will be shown
here
Options button
Provides a range of viewer and connection settings - MORE [+]
4 Make any necessary option/encryption changes and click the OK button
to proceed. Depending on the options selected, you may need to confirm
certain items.
5 A second connection attempt will be made and if successful, an
authentication dialog will be displayed:
6 Enter your username and password. The viewer window should now open
and show the current host computer. Note: If the Username entry is blanked
out then only admin user account is currently defined and only a password is
required.
If required, select the
encryption mode - MORE [+]
If required, select the
encryption mode - MORE [+]