La Crosse Technology WIRELESS 433 MHZ WS-7391U - Manual (Page 13)

13
11. Press and release the “SET” button to confirm the
year and to advance to
°F and °C selection (skip step
1 and 2 in section VI if continuing).
VI. Selecting
°F OR °C
1. Press and hold the “SET” button for 2 seconds or
until “12h” or “24h” flashes.
2. Press and release the “SET” button 9 times to reach
the
°F or °C setting mode.
3. “
°F” is the default setting and the temperatures
(inside and remote) will be flashing.
4. Press and release the “+” button to select
°F to °C.
5. Press the “SET” button to confirm and to advance to
the LCD setting (skip step 1 and 2 of section VII if
continuing).
VII. Setting the LCD Contrast
1. Press and hold the “SET” button for 2 seconds, or
until “12h” flashes.
2. Press and release the “SET” key 10 times to reach
the LCD contrast setting mode.
3. There are 8 LCD contrast levels to choose from—
“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
“Lcd 5” is the default setting.
4. Press and release the “+” button to toggle through
the settings.
5. Press and release the “SET” button to confirm and
exit the programming mode.