Lowrance electronic Lowrance GlobalMap 6500C - Manual (Page 75)

67
Navigating along a route: Fig. 1 shows the GlobalMap Navigation Page
at the start of a route, heading straight for the first waypoint (Wpt 1). In
Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been trig-
gered and the bearing arrow on the compass rose has turned to point
east, toward Wpt 2. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.15 miles away. Fig. 4
shows route navigation on the Map Page. In this figure, the traveler has
reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU | MENU | ↓ to M Y T RAILS
| ENT | ↓ to trail name| ENT | → to
D
ELETE
T
RAIL
| ENT | ← to Y
ES
| ENT .
Tip:
You can also delete all trails at once:
1. Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT .
2. Press →
to D
ELETE
A
LL
| ENT | ← to Y
ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU | ↓ to M
Y
T
RAILS
| ENT | ↓ to trail
name| ENT | ENT . Press
↑ or ↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
ENT
then EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the map with the cursor. Simply move the cursor over a trail and a
pop-up box appears. Press
WPT and the Edit Trail menu opens.
Figure 4. Figure 3.