Connections, Viewing setup, Using headphones – LG 23LC1R* User Manual

Page 16: Pc setup, Dtv setup, Monitor display specifications, After setup, be sure to select pc source on tv

Advertising
background image

16

Installation

- After setup, be sure to select PC source on TV.

PC Setup

PC Setup

Connections

1. Set the monitor output resolution on the PC before connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND input.

Viewing Setup

1. Turn on the PC.
2. Use the INPUT button on the remote control to select PC.

S-VIDEO

H/P

VIDEO IN1

PC INPUT

PC SOUND

ANT IN ( 75 )

COMPONENT (DTV/DVD IN)

AUDIO

DTV Setup

DTV Setup

- To watch digitally broadcast programs, purchase and con-

nect a digital set-top box.

Connections

Connect the digital set-top box video outputs to the COM-
PONENT (Y, P

B

, P

R

) jacks and connect the digital set-top

box audio outputs to the AUDIO jacks.

Viewing Setup

1. Turn on the digital set-top box. (Refer to the owner’s

manual for the digital set-top box.)

2. Use the INPUT button on the remote control to select

Component.

DTV Receiver

(Set-top Box)

S-VIDEO

H/P

VIDEO IN1

PC INPUT

PC SOUND

ANT IN ( 75 )

COMPONENT (DTV/DVD IN)

AUDIO

AUDIO

Y

P

B

P

R

(L)

(R)

NOTES
a. For optimum picture quality, use standard 1360x768@60Hz computer output at a 60Hz refresh rate . Using other

formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video
output format, please refer to the operating manual for the computer you are using).

b. If the message “

Out of range

” appears on the screen, adjust the PC output to a format listed in the

‘Monitor Display Specifications' chart above.

c. The synchronization input form for Horizontal and Vertical frequencies is separate.

DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
If you don’t use the PC cable provided, DPM mode may not work.

Monitor Display Specifications

S-VIDEO

H/P

PC SOUND

ANT IN ( 75 )

Using Headphones

Using Headphones

- Plug headphones in to H/P jack as shown.
- Adjust sound level to a headphone using the volume

(

F

,

G

) buttons. While you are listening to sound

through a headphone(s), TV speakers will not be heard.

MODE Resolution

Horizontal

Frequency(kHz)

Vertical

Frequency(Hz)

VGA

SVGA

XGA

WXGA

WXGA

640x480

800x600

1024x768

1280x768

1360x768

31.4

37.8

48.3

47.7

47.6

60

60

60

60

60

Advertising