Linksys WMCE54AG - Manual (Page 10)

Dual-Band Wireless A/G Media Center Extender
4 Chapter 2: Getting to Know the Media Center Extender
Front Panel
Navigation Pad
with LED
Press the left, right, up, or down arrows to navigate through the menus displayed on the TV
screen.
To indicate the status of the Extender, the LED can display one of three colors: green,
yellow, and red.
Green. The Navigation Pad LED will light up green when the Extender is booting up and
working properly. The green LED will flash quickly when the Extender is updating its
software image.
Yellow. The yellow Navigation Pad LED will flash quickly when the Extender is resetting
itself or restoring its software image.
Red. The red Navigation Pad LED will flash quickly when a system failure has occurred.
Enter Button Use the Enter button to make a selection from the menus displayed on the TV screen.
Back Button Use the Back button to move back through the menus displayed on the TV screen.
Standby Button Press the Standby button to put the Extender in power-saving standby mode. Press this
button again to use the Extender. After exiting standby mode, the Extender will re-establish
its connection with the Media Center PC. (This may take several seconds.)