La Crosse Technology WS-9611U-IT User Manual
Page 7
25
Hawaii
FAR Fargo
SAT San
Antonio
HNL Honolulu
Nebraska Utah
Iowa
LNK Lincoln
SLC Salt
Lake
City
DSM Des
Moines
SNY Sidney
Virginia
DVN Davenport
New Hampshire
LYH Lynchburg
Idaho
CON Concord
ORF Norfolk
BOI Boise
New Jersey
Vermont
Illinois
TTN Trenton
BTV Burlington
ORD Chicago
New Mexico
Washington
SPI Springfield
ABQ Albuquerque
SEA Seattle
Indiana Nevada
SFF Spokane
EVV Evansville
LAS Las
Vegas
West Virginia
IND Indianapolis
RNO Reno
CRW
Charleston
Kansas New
York
Wisconsin
DDC Dodge
City
BUF Buffalo
GRB Green
Bay
K32
Wichita
JFK
New York City
LSE
La Crosse
TOP Topeka
SYR Syracuse
West Virginia
Ohio
CRW Charleston
CLE
Cleveland Wyoming
CMH
Columbus CPR
Casper
26
CANADA CITY LIST
Code
City
Code City
Code
City
ALB
Calgary
OTT Ottawa
QUE
Quebec
VAN Vancouver
WIN Winnipeg
TOR Toronto
1.
The city abbreviation starts flashing.
2. Use
the
CH/+
key to toggle through the 99 cities and select city closest to your
location.
3.
Press the SET key to confirm selection and enter the Snooze Setting.
Note:
to view the sunrise, sunset, sun duration of selected city, please see “ Sunrise,
Sunset, Sun duration
” below.
SNOOZE SETTING:
The snooze time can be set from OFF to a maximum time of 30 minutes (default is 10
minutes):
flashing
27
1. Use
the
CH/+
key to set the snooze time. Each pressing of the key will increase
the snooze time by 5 minutes. The snooze can also be set OFF when the OFF
digit is being displayed.
2.
Confirm with the SET key and enter the Temperature setting.
Note:
If the snooze time has been set OFF, the snooze function will not be activated.
°F/°C TEMPERATURE UNIT SETTING
The temperature display can be selected to show temperature data in °F or °C (Default
°F
):
1. Use
the
CH/+
key to toggle between °F or °C.
2.
Confirm with the SET key and enter the Weather forecasting icon sensitivity
setting
.
WEATHER FORECASTING ICON SENSITIVITY SETTING
For locations with rapid changes of weather conditions, the weather icons can be set to a
different level for faster display of weather conditions.
flashing
28
1.
The current sensitivity value will start flashing
2. Use
the
CH/+
key to set the weather sensitivity level. There are 3 levels of setting:
1
, 2 and 3; level 1 is the most sensitive setting for high humidity areas; level 3 is
the slowest recording setting for arid areas (default setting is 2).
3.
Confirm with the SET key and exit the Manual settings.
SUNRISE, SUNSET AND SUN DURATION
To view Sunrise, Sunset and Sun Duration of selected city:
1. Press
the
SNOOZE
key once to view the sunrise time.
2.
Press a second time the SNOOZE key to view the sunset time.
3.
Press a third time the SNOOZE key to view the sun duration.
flashing flashing