Lightolier Architectural Decorative DSR01 - Manual (Page 2)

DSR01
Decorative, Round Step LED
Page 2 of 2
Philips Lightolier
e: [email protected]
t: (508) 679-8131
w: www.lightolier.com
DSR01 May 31, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.
Job Information Type:
Features
1. Heat Sink/Driver Housing: Die-cast aluminum.
2. Lens: Injection molded acrylic clear, developed for optimum
optical output.
3. Face Plate: Die-cast aluminum.
4. Switch Box Mounting Plate: 18ga. C.R.S. zinc plated, for
mounting to a 3 1/2” deep switch box. (Not shown)
Electrical
LED: (1) 4W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver:
Class 2 power supply.
Voltage: 120V
Electrical (continued)
Output Wattage: 5 W
Input Current (max.): 100 mA
Frequency:
50/60 Hz
Output Voltage (VDC): 12 V
Constant Current:
500 mA
Finish
Satin aluminum with protective clearcoat.
Matte white powder coat.
Labels
cULus Listed. Suitable for wet locations.
Wall mount only.
3"
(76 mm)
4 ½"
(114 mm)
1 ½"
(38 mm)
4 ½"
(114 mm)
1 ⅛"
(29 mm)
3"
(76 mm)
¾" (19 mm)
1 ⅛"
(29 mm)
3
2
1