Lathem 1200 Series - Manual (Page 5)

1200 Series User’s Manual
3
Setting the Time
Figure 1
Raise the Type Section
1. Unlock the case cover and pull it forward to remove it.
2. Wait until you hear the clock “click”.
3. Press either side of the Type Section Headlock – 1.2
and pull upward on the lower part of the Clock Face until
the Type Section locks in the up position as shown in
Figure 1. Note position of the Overthrow Lever and the
Setting Wheel.
4. Press the red Overthrow Lever – 1.3 away from you
until it clicks. This releases the wheels allowing them to
turn.