Lightolier 26000 - Manual (Page 4)

Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • C0910
ProSpec Track Lighting
26000
Page 4 of 4 Track
“L” Connector
The “L” connector is pre-wired.
Not polarized.
26050WH Matte White
26050BK Matte Black
“T” Connector
The “T” connector is not pre-wired
or polarized. Used to make “T” pattern
with track. 12ga. copper jumper
wires supplied to make all
necessary connections.
26051WH Matte White
26051BK Matte Black
“X” Connector
The “X” connector is not pre-wired.
Used to make “X” pattern with track.
12ga. copper jumper wires supplied
to make all necessary connections.
Not polarized.
26052WH Matte White
26052BK Matte Black
In-Line Connector
Permits power feed-in between
track units in a straight run of track.
The “In-Line” connector is pre-wired.
Not polarized.
26054WH Matte White
26054BK Matte Black
Mini-Coupler
Used to connect two pieces of track together
mechanically and electrically. Power cannot
be feed into the mini-coupler.
26049WH Matte White
26049BK Matte Black
Detail A
Use 12ga. solid copper wire for
feed connections including ground.
See Detail A
Typ. for all Track
Connections
4.18"
3.59"
5 1/4"
Extruded Aluminum Housing
3 7/16"
Line Joint
No Space
Two wires may be
attached to one
screw terminal.
Feed Connections for Surface and Stem Mounted Patterns
All connectors can be fed directly from above using a 3/8” or 1/2” electrical connector (by others).
NEUT
Extruded Aluminum Housing
10 9/16"
3.59"
3.59"
5 1/4"
7 3/16"
NEUT
See Detail A
Typ. for all Track
Connections
7 3/16"
3.59"
See Detail A
Typ. for all Track
Connections
Extruded Aluminum Housing
10 9/16"
6.44"
Extruded
Aluminum
Housing
6 3/16"
3 3/32"
See Detail A
Typ. for all Track
Connections
NEUT
NEUT