Feed water tube installation, Water connection instruction guide, Door replacement – LG LSC26905 User Manual

Page 9: Warning, Installation

Advertising
background image

Feed water tube installation

Push the refrigerator sideways through the
entrance door as shown in the right picture.

Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch

2

) (That

is, a 7oz. paper cup will be filled within 3 sec.).

to purchase a separate pressure pump for normal automatic icemaking and cool
water feed.
Keep the total length of the water feed tube within 40 feet and be careful not to
bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water
dispenser will not operate properly.
Install the water feed tube at a place free from heat.

Connect to potable water supply only.
Refer to instructions with water filter kit for installation.

Mount the doors in the reverse order of
removal after the refrigerator is brought to

the installation area.

Move the

Refrigerator

Before

Installation

Warning

Installation

9

Water Connection Instruction Guide

Read all directions carefully before you begin.

Connecting

the Refrigerator

to a Water Source

If operating the refrigerator before installing the water connection, turn icemaker
to the OFF position to prevent operation without water.

All installations must be in accordance with local plumbing code requirements.

Use copper tubing and check for leaks.

Install copper tubing only in areas where temperatures will remain above freezing.

It may take up to 24 hours for your icemaker to begin producing ice.

IMPORTANT

Standard screwdriver
7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches
1/4-inch nut driver
1/4-inch drill bit
Hand drill or electric drill (properly grounded)

Tools Required

Your refrigerator dealer has a kit available with a 1/4-inch saddle-type shut-off valve,
a union, and copper tubing. Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes. Do not use a piercing-type or 3/16-inch
saddle valve which reduces water flow and clogs more easily.

NOTE

Screwdriver

Adjustable wrenches

Electric drill

NOTE:
Check the direction of the lever hinge.

Correct

Incorrect

If water pressure does not reach the rated 21.3psi(lb/inc ) or below, it is necessary

h

2

Door replacement

Advertising