La Crosse Technology WS-6003U - Manual (Page 8)

8
3) Press and release the “+” button a third time and the display will return to the
normal display.
II) INDOOR TEMPERATURE
The Indoor Temperature appears on the right side of the Date LCD. The temperature
is checked every 10 seconds, and updated whenever there is a change.
MOUNTING
There are two possible ways to mount the atomic clock:
• use of the foldout table stands, or
• wall mounting.
I) FOLDOUT TABLE STAND
The foldout table stand leg is located on the backside,
directly below the battery cover and function buttons.
The hinge is towards the center of the atomic clock, and
the end (with no hinge) needs to be folded in towards the
center. Once the foldout table stand is extended, place the atomic clock in an
appropriate location.
II) WALL MOUNTING
1) Using a straightedge, horizontally space at 3-15/16 of
an inch (100.58mm) three screw positions on a wall.
2) Install three mounting screws (not included) into a
wall within transmission range—leaving
approximately 3/16 of an inch (5mm) extended from
the wall.
SET
Hanging Holes
Foldout Table Stands
Function Buttons