Lenovo LXM-WL19CH - Manual (Page 8)

PANEL CONTROL
•
Power:
Press this knob to switch ON/OFF of monitor’s power.
•
MENU/ENTER:
Activate OSD menu or function adjusts confirmation.
•
LENOVO Multi-Hue Function Hot Key:
Go into Multi-Hue mode
.
•
Brightness/▲ :
Adjust brightness or function adjustment.
•
Auto Config Key / EXIT:
1. When OSD menu is in active status, this knob will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this knob over 1 seconds to be
in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and
Focus automatically.
•
Power indicator :
Blue — Power On mode.
Orange — Power Off mode.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To keep the LCD clean, periodically clean it with a soft cloth. Any kind of
liquids will damage the LCD.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
8