Lantronix TS-DDH - Manual (Page 16)

Data Downloading Hardware
14
Fig. 3
4. Click Finish to complete the install.
Launch the Redirector.
Fig. 4
1. Open the Com Port Redirector and set up the virtual com ports.
2. Click the Com Setup button (Fig. 4).
3. Check the box next to the first two Com labels. This is usually Com3 and Com4, so the remainder
of this guide will assume it is. This enables port redirection for these com numbers.
4. Select COM3 from the top-center
“Redirect To” drop down menu.
5. Click the Add IP button.
6. Enter the IP address of the first ESC in the Host box.
7. Enter 3001 in the TCP port box (11000 less than the number entered for Channel 1 in the ESC
setup).