Arnings, Warning – LG WD-1259 series User Manual

Page 3

Advertising
background image

arnings

W

3

For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE

WARNING!

Do not push down the door excessively, when washer door open.

This could topple over the washer.

• Before installation, check exterior damages. If it has,

do not install.

• Do not install or store the washer where it will

be exposed to the weather.

• Do not tamper with controls.
• Do not repair or replace any part of the washer

or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or published user-repair instructions that you
understand and have the skills to carry out.

• Keep the area underneath and around your

appliances free of combustible materials such as
lint, paper, rags, chemicals, etc.

• Close supervision is necessary if this appliance is

used by or near children or infirm persons.
Do not allow them to play on, with, or inside this
or any other appliance.

• Keep washer away from fire.
• Do not leave the washer door open.

An open door could entice children to hang on the
door or crawl inside the washer.

• Never reach into washer while it is moving. Wait

until the drum has completely stopped.

• The laundry process can reduce the flame retardant

of fabrics.

• To avoid such a result, carefully follow the garment

manufacturer’s wash and care instructions.

• Do not wash or dry articles that have been cleaned

in, washed in, soaked in, or spotted with

combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode. Oil may remain in the tub after a whole
cycle resulting in fire during drying. So, do not load
oiled clothes.

• Do not slam the washer door closed or try to force

the door open when locked. This could result in
damage to the washer.

• When the machine runs high temperature, the front

door may be very hot. Don’t touch it.

• To minimize the possibility of electric shock, unplug

this appliance from the power supply or disconnect
the washer at the household distribution panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by

grasping the cord. Otherwise, the power cord may
be damaged.

• Never attempt to operate this appliance if it is

damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.

• Before discarding an old machine unplug it. Render

the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.

• When a product was under water, Please call

service center. The risk of electric shock and fire.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path
of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or otherwise defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

:

To reduce the risk of fire, electric shock, or injury to persons when using

the washer, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

WARNING

:

I

mproper connection of the equipment-grounding conductor can result in risk of electric shock. Check with

a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Advertising