LG LG B2150 EN - Manual (Page 53)

B2150 User Guide 53
Settings [Menu 4]
GPRS setting [Menu 4-6]
GPRS(General Packet Radio Service) is a technology that
allows mobile phones to be used for sending and
receiving data over the mobile network. GPRS is a data
bearer that enables wireless access to data network such
as the Internet.
Before you can use GPRS technology
- You need to subscribe to the GPRS service. For
availability and subscription to GPRS service, contact
your network operator or service provider.
- You need to save the GPRS settings for the applications
used over GPRS.
Power on [Menu 4-6-1]
If you select Power on and you are in a network that
supports GPRS, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker.
When needed [Menu 4-6-2]
If you select When needed, the phone will use a GPRS
connection only if you start an application or action
that needs it. The GPRS connection is closed after it is
no longer required by any application.
Reset settings [Menu 4-7]
You can reset your phone to its default configuration.
To do so, proceed, as follows.
1. Select the Reset settings menu option.
2. You are requested to enter the 4-digit security code.
Note
• The security code is preset to 0000. To change
this, refer to page 52.