LG LF-D7150 - Manual (Page 16)

Before Operation
16
LOCK (Parental Control)
Rating
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain parental
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
11
Select “Rating” on the LOCK menu then press
.
22
To access the Rating, Password and Country
Code features, you must input the 4-digit
security code you created.
If you have not yet entered a security code you are
prompted to do so.
Input a 4-digit code and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
33
Select a rating from 1 to 8 using the /
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit pass-
word or change the rating level in order to play the disc.
44
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
Password (Security Code)
You can enter or change password.
1 Select Password on the LOCK menu then press .
2 Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3 Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4 Press SETUP to exit the menu.
If you forget y our Security Code
If you forget your security code you can clear it using
the following steps:
1 Input the 6-digit number “210499” in the setup menu
and the security code is cleared.
2 Enter a new code as described above.
ote
When “ ” appears on the TV screen,
press STOP (x) and then press SETUP to move to the
setup menu.
Country Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
11
Select “Country Code” on the LOCK menu then
press .
22
Follow step 2 as shown left (Rating).
33
Select the first character using / buttons.
44
Shift the cursor using button and select the
second character using / buttons.
55
Press SELECT/ENTER to confirm your country
code selection.
DVD
INPUT PASSWD
DVD
LOCK
Rating
****
RU
Unlock
Password
Country Code
Move Select
U S