Land Pride Primary Seeders PSN2096 - Manual (Page 39)

Section 9: Troubleshooting
PSN2096 Primary Seeder 313-306M 37
Table of Contents
5/29/13
Section 9: Troubleshooting
Problem Solution
Uneven seed spacing or uneven stand. Check for plugging in seed cup.
Reduce ground speed.
Check for trash or mud build-up on rollers.
Actual seeding rate is different than
desired. Seed treatment will affect seeding rate if the chemicals build-up in seed cup.
Unless cleaned regularly, this build-up can cause breakage of the seed cup shaft.
Feed cup sprocket locked up or twisted
feed cup drive shaft. Check for foreign matter lodged in seed cup sprocket.
Packing rollers not turning freely. Check for trash or mud build-up on roller end.