Lexmark 4600 Series - Manual (Page 37)

Installing the printer on a wireless network
Before you install the printer on a wireless network, make sure that:
• You have completed the initial setup of the printer.
• Your wireless network is set up and working properly.
• The computer you are using is connected to the same wireless network where you want to set up the printer.
Using Windows
1 Insert the installation software CD.
2 Wait a minute for the Welcome screen to appear.
If the Welcome screen does not appear after a minute, do one of the following:
In Windows Vista
a Click .
b In the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP and earlier
a Click Start.
b Click Run.
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
3 Follow the instructions on the Welcome screen to set up the printer.
Using Macintosh
1 Insert the installation software CD.
2 Wait a minute for the Welcome screen to appear.
Note: If the Welcome screen does not appear after a minute, click the CD icon on the desktop.
3 Double-click Install.
4 Follow the instructions on the Welcome screen to set up the printer.
Wireless installation instructions (France only)
The following instructions apply to customers using a LiveBox, AliceBox, N9UF Box, FreeBox, or Club Internet.
1 Make sure your box is wireless-enabled and activated to work on a wireless network. For more information about
configuring the box to work wirelessly, see the documentation that came with your box.
2 Before installing the printer, make sure your box is turned on and that your computer is on and connected to
your wireless network.
3 Set up your printer using the setup instructions provided.
4 If there is an associate/registration button on the back of your box, press it when you are prompted to choose a
network.
Note: After pressing the associate/register button, you have five minutes to complete the printer installation.
37