Lathem 1000E - Manual (Page 18)

16
SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME
Example: Daylight saving time starts on Sunday, March 25, 2001.
Press the SELECT button and position
the " " mark at the "D.S.T. START".
At that moment, the "Year" flashes.
(The flashing means it can be changed.)
Change the "Year".
In case of the example, press the
CHANGE button to set at "01". And then
press the SET button.
At that moment, the flashing changes
from "Year" to "Month".
S
tep
1
D.S.T.
START
SELECT CHANGE SET
Change the "Month".
Press the CHANGE button to set at "3".
And then press the SET button.
At that moment, the flashing changes
from "Month" to "Date".
S
tep
2
Change the "Date".
Press the CHANGE button to set at "25".
And then press the SET button.
S
tep
3
After you finish setting the starting date of
D.S.T., press the SET button once again.
Now the starting date of D.S.T. setting has
been completed.
Go on to the "SETTING THE ENDING
DATE OF DAYLIGHT SAVING
TIME".
S
tep
4
SETTING THE DAYLIGHT SAVING TIME
Example: Start date Sunday, March 25, 2001.
End date Sunday, October 28, 2001.
If you set as the above, the time clock remembers the start date as the last Sunday of March
and the end date as the last Sunday of October. Once set, the time clock automatically
updates the settings every year thereafter. No further manual setting is necessary.
Year Date Month
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET