Lava Computer Lava BoxTM Distortion SFX-05 - Manual (Page 3)

Explanation of Controls
Front Panel
1. Volume – This control regulates the overall level of your signal when the
effect is engaged. CAUTION: The Lava Box is capable of serious output
so go easy with this control at first, starting at the fully counterclockwise
position. Once you get the Volume knob past 10:00 or so, you’ll see
what we mean.
2. Rumble – This 6-position rotary knob changes the sonic character of the
Lava Box’s distortion for a huge range of tones, from bright and spanky to
deep and warm. Whether you have the thinnest single-coil in the bridge
of your guitar or the woolliest humbucker in the neck, there is a Rumble
setting that’s perfect for it.
3. Gain – This knob adjusts the amount of distortion when the effect is
engaged, from a punchy clean boost to a full-on roar.
4. True-Bypass Footswitch – This removes the circuit from your guitar’s
signal chain, allowing your guitar’s signal to pass through the Lava Box
without affecting your tone or gain.
FRONT PANEL
2