Linksys DUAL BAND WIRELESS-N WPC600N - Manual

Dual Band Wireless-N
Notebook Adapter
Model No:
WPC600N
QUICK INSTALLATION
Package Contents
Dual Band Wireless-N Notebook
Adapter
Setup Wizard CD-ROM
User Guide on CD-ROM
Quick Installation
•
•
•
•
INSTRUCTIONS FOR
WINDOWS VISTA™
USERS ONLY
The Notebook Adapter is installed and set up using the Setup Wizard that
is on the enclosed Setup Wizard CD.
This Quick Installation is for Windows Vista users only. If you have Windows
XP or 2000, use the other enclosed Quick Installation.
IMPORTANT: Do not install the Adapter in your PC until you are
instructed to do so or the Adapter will not install correctly.
Insert the Setup Wizard CD into
your CD-ROM drive.
NOTE: Windows Vista or other personal firewalls may ask for
permission to run the software or program. You will need to allow
the software to run in order to continue.
The Welcome screen appears on
your monitor.
Click the Click Here to Start
button.
A.
B.
Installation 1�
Read the License Agreement
and click Next to continue the
installation.
Find an available CardBus slot on
your notebook PC.
With the connector pin end facing
the CardBus slot and the label
facing up, slide the Adapter into the
CardBus slot until it locks in place.
Click Next.
After you install the Adapter
correctly, the Congratulations
screen appears. (It may take a
moment for the screen to appear.)
Click Finish.
The first Windows Vista Wireless
Network Configuration utility
screen appears. Select your
network, then click Connect.
C.
D.
E.
F.