Lancom Systems LCOS 3.50 User Manual
Page 235
̈
Chapter 11: Wireless LAN – WLAN
LANCOM Reference Manual LCOS 3.50
235
Wi
re
le
ss
L
A
N
–
WL
A
N
stations. If the stations do not answer these packets, then the charging
systems recognises the station as no longer active.
Configuration with
LANconfig
For configuration with LANconfig you will find the general WLAN access
settings under the configuration area 'WLAN Security' on the 'General' tab.
Configuration with
WEBconfig or Telnet
Under WEBconfig or Telnet you will find the general WLAN access settings
under the following paths:
Access Control List
With the Access Control List (ACL) you can permit or prevent the access to
your wireless LAN by individual clients. The decision is based on the MAC
address that is permanently programmed into wireless LAN adapters.
Configuration with
LANconfig
For configuration with LANconfig you will find the general WLAN access
settings under the configuration area 'WLAN Security' on the 'Stations' tab.
Configuration tool
Menu/Table
WEBconfig
Expert configuration
̈
Setup
̈
WLAN module
̈
Inter-stations
traffic, monitor stations or IAAP protocol (for roaming)
Terminal/Telnet
cd /Setup/WLAN module/Inter-station traffic
,
Monitor stations
or IAAP protocol (for roaming)