Engine interface sensors, Electronic probe sensors, Nmea 2000 – Lowrance electronic Nautic Insight HDS-5m User Manual

Page 29: Network starter kit

Advertising
background image

29

www.lowrance.com

Engine Interface Sensors

Cabled sensors for top outboard brands

connects engines to NMEA 2000

®

networks to display engine data.

Electronic Probe Sensors

Only Lowrance offers the most NMEA

2000

®

sensors for vital boat data

monitoring, each with a built-in “smart

module,” that’s fully programmable for

greater accuracy in data delivery.

EP-60R Fuel Flow

Configurable, for gasoline only, one per

engine. Sapphire bearing technology

extends life and increases accuracy

even at low flow. Outputs Fuel Flow, Fuel

Used, Trip Fuel Used and Seasonal Fuel

Used data to the network for fuel
management. NMEA 2000

®

certified.

EP-65R Fluid Level

Compatible with standard U.S. and

European sending units and a range of

fluids: fuel; fresh, waste or black water;

live well; and oil. Allows calibration for

more accurate fluid level readings for

boats with odd-shaped tanks. NMEA

2000

®

certified.

EP-70R Speed

Paddle wheel for speed and distance

display; NMEA 2000

®

certified.

EP-80R Temperature

Configurable sensor for surface water,

livewell, baitwell, cabin and engine room

temp readings, -20ºC to 80ºC (-4º to

176ºF). NMEA 2000

®

certified.

EP-80R TH Temperature

Configurable surface water temp sensor

for thru-hull installation. NMEA 2000

®

certified.

EP-85R Storage Device

Accumulates and stores real-time engine

data of fuel flow messages for up to

three engines connected to a NMEA

2000

®

network for fuel range

calculations and display. NMEA 2000

®

certification pending.

EP-90R Pressure

Outputs pitot speed or engine pressure

readings – boost, coolant, fuel, engine or

transmission oil. 100 psi max. NMEA

2000

®

certification pending.

Yamaha (late model)
Suzuki (DF Series)
Evinrude (E-TEC)

Networking & Digital Gauges

NMEA 2000

®

Network Starter Kit

Here’s how to easily start your own NMEA 2000

®

onboard network, allowing future expansion to

add sensors and displays. NMEA 2000

®

compliant components include two T-connectors,

2-foot cable, 15-foot cable, two terminating

resistors and network power cable.
N2K-EXP-RD-2 124-69

Advertising