LG 65VS10 - Manual (Page 26)

26
ENG
ENGLISH
ENTERTAINMENT
ENTERTAINMENT
Using integrated media
features
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive, or MP3 player
to the Monitor set and use multimedia features
(“
Browsing files ” See p.27).
Connect a USB flash memory or USB memory
card reader to the Monitor set as shown on the
following illustration. The USB screen appears.
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the Monitor set or files.
y Do not turn the Monitor set off or remove a
USB storage device while the USB storage
device is connected to the Monitor set, as
this could result in loss of files or damage to
the USB storage device.
y Back up your files saved on a USB storage
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
CAUTION
Precautions when using the USB device
y Only a USB storage device is recognizable.
y If the USB storage device is connected
through a USB hub, the device is not
recognizable.
y A USB storage device using an automatic
recognition program may not be recognized.
y A USB storage device which uses its own
driver may not be recognized.
y The recognition speed of a USB storage
device may depend on each device.
y Please do not turn off the Set or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
y Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files or image files.
y Please use only a USB storage device which
was formatted as a FAT16, FAT32, NTFS file
system provided with the Windows operating
system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized. Data in a USB storage device
cannot be deleted in the NTFS file system.
y Please connect power to a USB storage
device which requires an external power
supply. If not, the device may not be
recognized.
y Please connect a USB storage device with
cable is offered by USB maker. If connected
with cable is not offered by USB maker or an
excessively long cable, the device may not
be recognized.
y Some USB storage devices may not be
supported or operated smoothly.
y Maximum of 999 files and folders can be
recognized.
y Data in a USB storage device cannot be
aligned. Up to 128 English characters can be
or