Installer menu – LG 26-3DCH-UA User Manual
Page 35
Menu Item
Function
Value Range Default Value
Brief Description of Function and Comments
030
ACK MASK
0 / 1
0
If set to 1, changes M.P.I. for some OCV boxes.
031
POLL RATE
20 ~ 169
94
Selects poll rate for M.P.I.
032
TIMING PULSE
186 ~ 227
207
Sets baud rate for M.P.I.
034
CAMPORT EN
0 / 1
1
Set to 1 to enable Video 2 input.
035
COMPPORT EN.
0 / 2
1
Set to 0 to disable HDMI 1. Set to 1 for DTV, set to 2 for PC.
038
YPrPb EN.
0 / 1
1
Set to 1 to enable display panel Component Video 1 input jacks.
039
REAR AUX EN
0 / 1
1
Set to 1 to enable display panel Video 1 input jack.
040
AUTO CAMPORT
0 / 1
1
Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE cannot be set to 2.
046
STRT AUX SRCE
0 ~ 6
6
Sets the starting AUX source.
047
AUX STATUS
0 / 1
0
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
053
DIS. CH-TIME M.
0 / 1
0
Set to 1 to disable Channel-Time display.
069
EN. CH-T COL.
0 / 1
1
Set to 1 to enable custom color for the Channel-Time display.
070
FOR. CH-TIME
0 ~ 7
2
Chooses custom foreground color for the Channel-Time display.
071
BCK. CH-TIME
0 ~ 7
2
Chooses custom background color for the Channel-Time display.
073
CH NOT AVBLE
0 / 1
0
If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed
when directly accessing a channel not in the favorite channel list.
075
REVERT CH
0 / 1
0
If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
077
QUICK SHUTOFF
0 ~ 17
0
Allows TV timed power off press and hold setup with pillow speaker channel button.
078
UPN MSB
0 ~ 255
255
User programmable number, most significant byte.
079
UPN MSB-1
0 ~ 255
255
User programmable number, most significant byte - 1.
080
UPN MSB-2
0 ~ 255
255
User programmable number, most significant byte - 2.
081
UPN LSB
0 ~ 255
255
User programmable number, least significant byte.
082
CHKSM ERROR
0 / 1
0
Enforces rigid M.P.I. checksum.
083
HANDSHK TIME
0 ~ 5
5
Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084
PERMANENT BLK
0 / 1
0
Removes block hours setting for Parental Control and makes block permanent.
087
REAR RGB EN.
0, 2, 18
2
Set to 0 to disable RGB1. Set to 2 to enable for RGB PC. Set to 18 for Auto detect configure.
088
EN NOISE MUTE
0 / 1
1
If set to 1, mutes audio if no signal is present.
090
KEY LOCK
0 / 1
0
Set to 1 to disable front keyboard. Set to 1 to enable front keyboard functionality.
`
094
SAP MENU EN
0 / 1
1
Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096
DEF. ASP. RATIO
0, 2, 4, 5
2
Sets default aspect ratio at power up. See detailed descriptions and item 106.
099
BACK LIGHTING
1 ~ 100
200
Sets the brilliance of the TV picture backlighting.
101 ~ 200
Settings above 100 control dynamic back lighting and disable power saving mode..
102
ATSC BAND
0 ~ 4
4
Selects ATSC band.
103
ATSC TUNE MODE
0 / 1
1
Default 01 for physical channel scan. Set to 0 for Virtual Channel scan.
104
START MINOR CH
0 ~ 255
0
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
106
ASP RATIO LOCK
0 / 1
0
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
116
VIDEO MUTE EN
0 / 1
0
Set to 0 for normal, set to 1 for Blank.
117
FACT DEFAULT
0 / 1
0
0=Normal. 1=Loads presets of all above settings.
118
POWER SAVING
0 / 1
1
Set to 0 to disable power saving mode.
Installer Menu Items 031 through 118
Installer Menu
P A G E 3 5
206-4071