Lexmark C522 - Manual (Page 57)

Identifying the multipurpose feeder or the manual feed slot
57
Loading media
12 Slide the width guide to the right until it lightly touches the edge of the stack for transparencies, card stock, or
envelopes. For paper, the guide was already placed before the paper was loaded; however, check to see if the
guide needs a slight adjustment.
Make sure the media fits loosely in the multipurpose feeder and is not bent or wrinkled.
13 Set the Paper Size and Paper Type in the menus from the operator panel.
Note: Press the release tab down prior to removing media from the multipurpose feeder.
Using and loading the manual feed slot
Use the manual feed slot to load single sheets not kept in a tray, such as letterhead when a special sheet needs to be
printed.
When Load Manual feeder with x appears on the operator panel, load a single piece of media in the manual feed slot
as specified for x. Load the media, and press
.
See Media guidelines for a listing of supported types and sizes.
Note: When printing from the manual feed slot, be sure to set the Paper Size and Paper Type. See Setting
the Paper Type and Paper Size for more information. Loading the manual feed slot while a print job
is already printing may cause a jam.
Release tab