LumiSource Rock Show Venue - Manual (Page 4)

4
CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES
Step 1: Connect the Red/White ends of RCA to MINI cord (8) into AUDIO IN of Rock Show™.
Step 2: Plug the single end of the RCA cord (8) into the headphone jack of your device.
Step 3: Turn Rock Show™ on by turning Volume knob clockwise.
Step 4: Turn on portable device and turn up the volume.
Step 5: (optional) Plug in 1 or 2 microphones to sing along.
iPod® *
MP3 Player
Portable Audio Device
PSP® or Nintendo DS®
Computer
Portable Game Device
*
Note: Some Apple™ devices such as iPhone™ or iTouch™ require special 1/8 in. (3.5 mm) TTY adapter (sold separately)
* CAUTION: Use ONLY provided adaptor! Different voltage may cause permanent damage.
** CAUTION: DO NOT place microphone directly in front of speakers. Feedback will occur.
NOTE: Gaming microphones with USB connections must be connected directly to their respective game consoles. The Rock
Show™ mic. is not programmed to control elements of the game.
(ADAPTER)
BACK PANEL
Step 1: Connect the two Unit Connector Cords (6).
Step 2: Plug in provided adapter (5) as pictured. *
Step 3: Connect to audio source using one of the connection methods described in this manual.
Step 4: Connect microphone cord if needed. Plug in 1 or 2 microphones to sing along. **
BASIC SET UP
(ADAPTER)
BACK PANEL
Step 1
Step 2
headphone jack