LevelOne FSW-1610TX - Manual (Page 11)

7
Install the Switch on a sturdy, level surface that can support its weight,
or in an EIA standard-size equipment rack. For information on rack
installation, see the next section, Rack Mounting.
When installing the Switch on a level surface, attach the rubber feet to
the bottom of each device. The rubber feet cushion the hub and
protect the hub case from scratching.
Rack Mounting
The switch can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipment. Attach
the mounting brackets at the switch’s front panel (one on each side),
and secure them with the provided screws.
16-Port 1 0/100M bps Ethe rn et Sw itch
SYSTEM F DX
POWER Link/A CT FX
Then, use screws provided with the equipment rack to mount each
switch in the rack.
1 6-Port 1 0/100M bps Eth ernet Sw itc h
SYSTEM FD X
POWER Link/A CT F X