Liebherr 7080 359-02 - Manual (Page 9)

I
NTEGRATING
C
ABINETRY
- CI 16
ONLY
7 C 16/CI 16
A delight in freshness
Overlay Panels
The overlay design line allows decorative panels to
cover the door trim for a more seamless
appearance that blends with the design of the
room. To achieve this look, the most common way
is to work with three panels, the decorative overlay
panel, a 0.10" (0.25 cm) spacer panel and a 1/4"
(0.635 cm) backer panel.
Overlay Panel 28.7" (72.9 cm)
Spacer Panel 27.4" (69.6 cm)
Backer Panel 28.2" (71.7 cm)
Overlay Panel 47.6" (120.9 cm) Spacer Panel 45.3" (115 cm) Backer Panel 46.3" (117.6 cm)
Overlay Panel 29.2" (74.3 cm) Spacer Panel 27.9" (70.9 cm) Backer Panel 28.9" (73.5 cm)
Refrigerator
Panel
Freezer
Panel
0.1" (0.25 cm)
0.0625" (0.16 cm)
0.6" (1.5 cm)
Overlay Panel
Spacer Panel
1/4" (0.635 cm)
Backer Panel
7080 010
Figure 5
Depending on your cabinet manufacturer, this could
be one panel routed for different dimensions or,
more likely, three different panels.
IMPORTANT
If you are replacing the factory air vents with
an overlay, DO NOT restrict the air flow. The
air flow must be the same or greater than the
factory air vents of 31 square inches (200
cm
2 ).
The door handles must be installed before the
screw covers are installed. If you fail to install
the handles before the screw covers, you can
damage the covers. The screw covers are
taped to the unit doors during shipping. Use
care when removing covers.
The door panel weight must not exceed 25 lb
(11.3 kg).