Lennox Hearth HCI-42 - Manual (Page 6)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 6
FIREPLACE SPECIFICATIONS
Figure 10
Figure 8
Figure 9
Step 3. Refer to fireplace drawings and specifi-
cations on pages 6 and 7 for framing dimensions
and details. Frame appliance enclosure as illus-
trated in
Figures 11 through 14 on page 8.
IMPORTANT: UNDER NO CIRCUMSTANCES
CAN THE FIREPLACE TOP SPACERS (
FIGURE
10 ) BE REMOVED OR MODIFIED, NOR MAY
YOU NOTCH THE HEADER TO FIT AROUND OR
BE INSTALLED LOWER THAN THE SPACERS.
THE HEADER MAY BE IN DIRECT CONTACT
WITH THE TOP SPACERS BUT MAY NOT BE
SUPPORTED BY THEM.
Note: The framed depth, 23-7/8" (606 mm)
from a framed wall, must always be measured
from a finished surface. If a wall covering such
as drywall is to be attached to the rear wall, then
the 23-7/8" (606 mm) must be measured from
the drywall surface. It is important that this
dimension be exact.
If the appliance is to be elevated above floor
level, a solid continuous platform must be
constructed.
The header may rest on the top metal spacers,
but must not be notched to fit around them.
Consult all local codes.
Blocking
Metal Safety Strips
Metal Safety Strips 1-1/2"
46-3/4"
(1187 mm)
31-9/16"
(802 mm)
8-1/2"
(216 mm)
Top View
Right Side
Gas Line
Access
Junction
Box
Combustion
Air Inlet
9-7/8"
(251 mm)
22-7/8"
(581 mm)
41-3/8"
(1051 mm)
23-1/2"
(597 mm)
Left Side
46-3/4"
(1187 mm)
Front
46-3/8"
(1178 mm)
7-3/4"
(197 mm)
41"
(1041 mm)
2-7/8"
(73 mm)
12-1/2"
(318 mm)
22-5/16"
(566 mm)
16-5/16"
(414 mm)
8-3/8"
(213 mm)
Fireplace Top Spacers
Fireplace
Top Spacer
Gas Line
Access
17-5/16"
(439 mm)
10"
(254 mm)
12-1/2"
(318 mm)
50-1/4"
(1276 mm)
1-3/4"
(44 mm)
40-1/2"
(1029 mm)
23-1/2"
(597 mm)
46-3/8"
(1178 mm)
13-5/8"
(346 mm)
40-1/2"
(1029 mm)
1/2"
(13 mm)