Lenoxx Electronics SL515 - Manual (Page 10)

IB-SL515(SY-CL)-WC-E-032505
1. During stop mode, press the MEMORY button, the
words MEMORY and TRACK will be steadily on in
the display. The symbol “Pr:01 --” also will show in
the display.
2. Press the SKIP button or to select the
tracks you want to program in the order you want.
The track number you selected will flash in the
display.
3. Press the MEMORY button to confirm. The symbol
“Pr:02 --” will show in the display.
4. Repeat above steps 2 and 3. You can program up to
16 tracks, then the display will show “Pr:01” again
and the first track you programmed.
5. Pr ess the PLAY /PAU SE button to start the
programmed play. The word MEMORY will show in
the display.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button twice.
You can make a program of up to 16 tracks in the order you want them to be played.
CD PROGRAM PLAY
MEMORY button
SKIP
SKIP
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the power is shut off or the door is opened.
9
IB-SL515(SY-CL)-WC-E-032505.pmd 5/17/2005, 9:07 AM 10