Link electronic GT701AP - Manual (Page 22)

21
NOTE: Ensure the MAC Address entered is in the correct format (i.e., six sets of two hex-
idecimal numbers separated by colons). A properly formatted MAC address would be the
following:
00:20:ea:08:00:17
If an incorrectly formatted MAC address is entered, an error message stating that an
invalid MAC address has been entered appears. If this occurs, enter a properly format-
ted MAC address.
Information
The “Information” screen contains the Access Point’s current configuration informa-
tion. No settings can be changed from this screen.
Administration
The “Administration” menu page enables you to change the User Name And
Password settings that allow access to the Access Point’s control panel. This page also
has menu selections to enable upgrades to the Access Point’s firmware.
The Username/Password setting is disabled when the Access Point is shipped from
the factory to allow for easy first-time access to the control panel. There is no menu
selection to enable the password feature - simply changing the password activates it
to its normal enabled state.
To change the Access Point’s Username and Password:
1. Enter a a user name into Username text box (or leave the default “admin”) and a
password in the New Password text box.