Lenoxx Electronics CD-108 - Manual (Page 19)

Troubleshooting
Problem Remedy
The power is not on.
•
Connect the AC power cord to a wall
outlet securely.
•
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
Make sure the Function Switch is at the
right position as you want.
•
Adjust the volume.
•
Unplug the headphones when listening
through speakers.
“ ” appears in the display
even when a CD is in place.
•
Insert the CD with the label side facing you.
CD does not play.
•
Make sure that the CD compartment is
closed.
•
Place the CD with the label side facing you.
•
Clean the CD.
•
Take out the CD and leave the CD door
open for about an hour to dry moisture
condensation.
•
Make sure the Function Switch is at CD
position.
•
Clean the CD, or replace it if the CD is
badly damaged.
•
Place the player in a location free from
vibration.
•
Check if your batteries are fresh.
The sound is weak or has poor
quality.
•
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
The Record Button does not
function / The tape does not
play.
•
Make sure the safety tab on the cassette
is in place.
•
Make sure the Function Switch is at TAPE
position.
The tape does not erase
completely.
•
Clean the erasing head (see page 17).
•
Replace all the batteries with new ones if
they are weak.
The tape does not record.
•
Make sure the tape is inserted properly.
•
Make sure the safety tab of the cassette
is in place.
The sound is weak / The sound
quality is poor.
•
Clean the heads, pinch roller and capstan
(see page 17).
General
CD player
Radio
18
The sound drops out.
Tape player
Cassette Play Button pops up.
•
The tape has reached its end. Remove it,
flip to the other side and re-insert.
CD-108072799 v.1 E