Lenoxx Electronics HT-377 - Manual (Page 7)

IB-HT377-WM-E-050405
ON/STANDBY
MUTE SOUR CE
LOCATION OF CONTROLS
REMOTE CONTROL
2
3
5
4
6
1. IR DIODE - Sends the signal to the set. Do not
block or cover this.
2. ON/STANDBY button - Switches the player from
STANDBY to ON or ON to STANDBY.
3. MUTE button - Instantly turns off the sound. Press
again to restore the sound.
4. SOURCE button - Press to select the sound input
source you want: DVD or MP3.
5. VOLUME button - Press to decrease the volume.
6. VOLUME button - Press to increase the volume.
1
REMOTE CONTROL OPERATION
Remove the BATTERY COMPARTMENT DOOR of the REMOTE CONTROL and insert 2 size
“AAA” alkaline batteries (included) according to the + and - markings inside the BATTERY
COMPARTMENT of the REMOTE CONTROL unit, replace the door.
Battery Installation
Gently push here and slide to open the BATTERY
DOOR.
Insert 2 size “AAA” batteries as shown (included).
Remember, the spring touches the NEGATIVE (-)
side of each battery.
Tips on Battery Use
•
Reversing polarities will damage the
batteries and possibly your REMOTE.
Be sure to follow polarity ( + and -) as
indicated.
•
Do not mix different types batteries
together (Alkaline, Carbon-Zinc, Nickel-
Cadmium etc.), or old batteries with new
ones.
•
When not in use for an extended period of
time (over 60 days) remove the batteries
to prevent possible acid leakage or
corrosion resulting in damage to your
remote.
•
When the batteries have become
discharged, they must be disposed of in a
safe manner that complies with all
applicable laws.
•
Installation of batteries should only be
done by an adult (for safety).
Replace the door.
6
IB-HT377-WM-E-050405.pmd 6/2/2005, 2:15 PM 7