Lennox International Inc. HSXA15 - Manual (Page 4)

Please record the following information for your
convenience.
Dealer Name:
Address:
Phone Number:
Unit Model Number: HSXA15 –
Installation Date:
Before you call
If your system fails to operate, check the following
before calling for service:
D Check to see that all electrical disconnect
switches are ON.
D Make sure the room thermostat temperature
selector is properly set.
D Make sure the room thermostat system switch is
properly set.
D Replace any blown fuses, or reset circuit
breakers.
D Make sure unit access panels are in place.
D Make sure air filter is clean.
D Locate unit model number and have it handy
before calling.
504,500M 02/2002  2002 Lennox Industries Inc., Dallas, TX Litho U.S.A.
*P504500M*
THERMOSTAT OPERATION -- COMFORT IS AT YOUR FINGERTIPS
System Switch
Set the system switch for heating, cooling or auto op-
eration. The auto mode allows the system to automati-
cally switch from heating mode to cooling mode to
maintain predetermined comfort settings.
Temperature Indicator
The temperature indicator displays the actual room
temperature.
Programmable Thermostats
Your Lennox system may be controlled by a
programmable thermostat. These thermostats provide
the added feature of programmable time-of-day
setpoints for both heating and cooling. Refer to the
user’s information manual provided with your
particular thermostat for operation details.
Though your thermostat may vary somewhat from the
description below, its operation will be similar.
Temperature Setting Levers
Set the lever or dial to the desired temperature setpoints
for both heating and cooling. Avoid frequent tempera-
ture adjustment; turning the unit off and back on before
pressures equalize puts stress on the unit compressor.
Fan Switch
In AUTO or INT (intermittent) mode, the blower oper-
ates only when the thermostat calls for heating or cool-
ing. This mode is generally preferred when humidity
control is a priority. The ON or CONT mode provides
continuous indoor blower operation, regardless of
whether the compressor or furnace is operating. This
mode is required when constant air circulation or filter-
ing is desired.
Visit us at www.lennox.com, or contact us at 1-800-9-LENNOX.