LG LRM-519 User Manual
Page 27
27
To program the remote to control the TV
1.
Make sure your TV is turned on.
2.
On the Recorder remote, press and hold the TV POWER button.
3.
Using the numeric keypad, enter the manufacturer code for your TV.
4.
Your TV will turn off if the code is correct.
5.
Press TV POWER. Your TV should turn on. Press VOL+/- to change
the volume or toggle MUTE to turn the sound on or off.
6.
If the buttons do not turn the TV off or on, change the volume, or
mute the TV, repeat steps 2 to 5 using a different code for the TV
manufacturer.
Notes
•
The remote control is programmed to control LG brand TVs by
default.
•
If you enter a new code number, the code number previously entered
will be erased.
•
After you replace the batteries in the remote, the code number you
have set may be reset to the default setting. If the remote does not
change the volume or mute the TV after you change the batteries,
re-enter the code.