La Crosse Technology WS-8053U - Manual (Page 7)

7
FEATURES & OPERATIONS
I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE)
There are three possible display modes to view the day, seconds, and temperature. The month &
date/weekday/moon phase/indoor temperature is the default.
To change the display:
1) Press the “+” button.
2) The display should now show the month & date/weekday/moon phase/seconds.
3) Press the “+” button a second time.
4) The display will now show the month & date/seconds/moon phase/indoor temperature.
5) Press the “+” button a third time.
6) The display will return to the normal display.
II) THE ALARM
A) SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25 second periods, the rate of
the alarm increases.
1) Hold down the “ALARM” button for 5 seconds.
2) The “TIME” icon to the right of the minutes (in the time LCD) shifts to “ALARM”, and the hour
digit of the alarm flashes.
3) Press the “+” button to set the alarm hour.
4) Press the “ALARM” button to confirm the hour, and to set the alarm minutes.
5) The alarm minutes flash.
6) Press the “+” button to set the alarm minutes.
WWVB Tower Icon
Alarm Icon
Moon Phase
Icon
Indoor
Temperature
Weekday Month/Date