Land Pride RCP26 Series - Manual (Page 2)

9
Optional gauge wheel deck allows
the cutter to float over undulations
without having to constantly monitor
terrain conditions.
• 540 or 1000 rpm
• Cat 2 & 3
• Horizontal cutting reach of 18’10”
• Hydraulic break away and reset
• Case drain deck motor
Great for those roadsides that want a
manicured look further down the ditch, or
being able to stay a little further away from
the soggy banks of the pond.
3 Foot longer reach
than the RCP26 Series.
RCP30
SERIES
95 - 175 HP — 60”
Min. tractor weight - 12,000 lbs.
Hydraulic breakaway feature pivots arm backward to avoid obstacles and protect
cutter arm. Hydraulically pivots back into place.
Flow control valve
compensates for various
hydraulic systems. Cylinder shear-bolt
breakaway for frame
protection. Shut-off valve permits
maintenance without oil loss.
Grease zerks at all pivot points.
Electronic cylinder controls provide instant
response for adjustments on the go.