Lincoln International PRECISION TIG 225 - Manual (Page 2)

[ 2 ] | Precision TIG ® 225
ARC PERFORMANCE
Micro-Start ™ II Technology aids arc stability
THROUGHOUT THE WELD CYCLE –
even at the lowest amperage!
Micro-Start ™ II Technology
controlled ramp down helps precisely fill
the weld crater for quality results.
Micro-Start ™ II Technology minimizes high
frequency and ‘hot starts’ to deliver soft arc starts
without arc wandering for AC and DC welding.
Micro-Start™ II Technology — More than just a starting aid.
Better control for starting, arc stability and crater fill.
Great Starting Stable, Focused Arc Precise Crater Fill
NOW
INCLUDES
AC
for ALUMINUM
AC
A CLOSER LOOK
1) Power Switch
2) AC Balance Control with Auto Balance ® Setting
3) Mode Switch
4) Digital Amp Meter (Preset/Actual)
5) Thermal Shutdown Light (Back Lit)
6) Output Preset Control
7) Post Flow Time
8) Pulse Frequency Control and Pulse Rate
Indicator Light
9) Polarity Switch
10) Twist Mate ™ Output Connector for TIG
Torch or Electrode Cable for Stick Welding
11) Attached Work Cable
12) Remote Receptacle
4 5
3
2
6
10 12 11
1
• Large, well-spaced controls make it easy to view and set up
with gloved hands.
KEY CONTROLS
8
7
9