LG WD3632HS - Manual (Page 6)

INSTALLATION INSTRUCTIONS
6
¡Æ Installation clearances
The location must be large enough to fully open
the washer door.
¡Æ Washer dimensions
• Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
¡Æ Minimum installation spacing for
recessed area or closet installation
The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required for wall,
door and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of
the washer is recommended to reduce noise
transfer.
• For closet installation, with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent
ventilation openings are acceptable.
Companion appliance spacing should also be
considered.
¡Æ Level floor
Allowable slope under entire washer is 1°.
¡Æ Power outlet
Must be within 60 in.(1.5m) of either side of the
washer. Do not overload the outlet with more
than one appliance.
[Closet door with vents]
[Front view]
[Side view]
49-
4/5
"
(12
6.5 cm
)
42-
3 /
4
"
(108.6 cm)
36"
(91.5 cm)
27"
(68.6 cm)
29- 1/2 "
(75.0 cm)
29- 1 /
2
" 1"
(2.5cm) (75.0cm)
3"
(7.6 cm)
3"
(7.6 cm)
48" 2
(310 cm 2 )
24" 2
(155 cm 2 )
4"
(10cm)
27"
(68.6 cm)
1"
(2.5cm)
1"
(2.5cm)