Hookup, Displaying information on-screen, On-screen display operation – LG LHY-518 User Manual

Page 35: Displaying osd while watching tv, Changing tv channels, Changing tv audio channel

Advertising
background image

HOOKUP

35

Before Operation (Continued)

General Explanation of
On-Screen Display

This manual gives basic instructions for operating the
Recorder Combi Receiver. Some DVDs require specific
operation or allow only limited operation during play-
back. When this occurs, the symbol

appears on the

TV screen, indicating that the operation is not permitted
by the Recorder Combi Receiver or is not available on
the disc.

Displaying Information on-screen

You can display various information about the disc or
tape loaded on-screen.

On-screen display operation

11

Press DISPLAY repeatedly to display/change the
information displayed on-screen.

22

To remove the on-screen display, press DIS-
PLAY or RETURN (
O) repeatedly until it disap-
pears.
See the descriptions on pages 36 and 37 for
detailed explanations of on-screen displays for each
media type.

otes

Some discs may not provide all the features shown in
the on-screen display examples.
The on-screen display disappears automatically if no
button is pressed for seven seconds.

Temporary Feedback Icons

Resume play from this point

Action prohibited or not available

Displaying OSD While Watching TV

While watching TV, press DISPLAY to display/
remove the on-screen display.

For example, when a DVD-RW in VR mode is inserted, you
would see a screen similar to the fol-

low-
ing:

Changing TV Channels

If no disc is playing, you can change TV channels using
the number or TRK/PRESET (+/-) (v / V) buttons on the
Remote Control.

ote

Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.

Changing TV Audio Channel

Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.

Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown
below.

• STEREO+SAP Audio Signal

Stereo → SAP → Mono → Stereo

• STEREO Audio Signal

Stereo → L → R → Mono → Stereo

• SAP Audio Signal

Mono → SAP → Mono

• MONO Audio Signal

Mono

The current audio channel is displayed on-screen.

• If SAP is selected, but there is no SAP channel being

broadcast, you will still hear the main audio (Mono or
Stereo) channel.

• If the sound is poor quality when set to Stereo, you

can often improve it by changing to Mono.

• When an external input is selected, the audio channel

can be switched only to Stereo.

DVD-VR

VR Mode

SP

1H 32M Free

03/08/2005

Mono

11:35AM

MONO

DVD

Ch. 6

Indicates disc type.

Indicates channel

number and

audio input

signal received

by the tuner.

Indicates the Recording mode,

free space, and elapsed time

progress bar.

Indicates current date and time.

Indicates output audio signal.

Advertising