Lincoln Mountaineer 1997 - Manual (Page 81)

instruction under Installing child
safety seats in combination lap
and shoulder belt seating
positions in this chapter.
4. Hook the tether strap around
the webbing near the center of the
shoulder portion of the rear safety
belt and tighten.
BUILT-IN CHILD SEAT (IF
EQUIPPED)
The rear seat may include a
built-in child seat. This child seat
conforms to all federal and
Canadian motor vehicle safety
standards. Read the labels located
on the child seat cushion and
shoulder belt for information on
the built-in child seat.
Use the built-in child seat only
under the following conditions:
Child’s Age Child’s Weight Child’s Height
At least 1 year 10-27 kg (22-60 lb) Shoulders must be
below the shoulder
harness slots on the
built-in child seat
Children not meeting these
requirements should be secured in
an approved aftermarket child
seat. Refer to Children and
infant or child safety seats in this
chapter.
Seating and safety restraints
81