Loewe A 37 EN - Manual (Page 40)

40
What to do, if ...
Problem
The “Recording” menu point is not displayed in
the TV menu.
“Connections” cannot be called in the TV menu
(deactivated).
The control of the Loewe video recorder and
the timer do not work or do not work properly.
General problems with connecting external
equipment via an AV input.
A decoder connection does not function or is
faulty.
All menus appear in the wrong language.
Possible cause
No video or DVD recorder logged in.
A time recording is in progress.
a) The Digital Link function is not activated or not
possible in the recorder.
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
a) The device is not logged in to the connection
wizard or is connected differently than is
shown in the connection diagram.
b) The AV standard is set incorrectly.
c) The AV signal is set incorrectly.
a) The signal is not decoded because the wrong
decoder stations are selected in the connection
wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the
connection wizard.
Menu language has been set incorrectly.
Help
Log in the video or DVD recorder in the
connection wizard and connect the device.
Wait until the timer recording has ended or delete
the timer.
a) Activate Digital Link in the recorder (see
operating instructions of the video recorder).
b) Connect the Euro-AV cable.
c) Login recorder.
a) In the connection wizard (TV menu –
Connections – New devices/modifications),
compare the connection diagram with the
actual installation and connect as shown, if
necessary.
b) Set the standard correctly.
c) Set the AV signal correctly.
If “Automatic” is set for AV standard or AV signal,
this can lead to faults with signals which do not
conform to standard. Then the standard and the
signal are to be set according to the specifications
in the operating instructions of the external device.
a) Follow the instructions in the connection
wizard again (TV menu – Connections – New
devices/modifications) and select the
corresponding decoder station.
b) Follow the instructions in the connection
wizard again and select the right audio source
(decoder, TV or autom.), see instructions of the
decoder.
Set your menu language:
Press the INFO button in TV mode (index). Select
the first index item and call it by using OK. Then
select the language and confirm with OK.