Lowrance electronic 4000M - Manual (Page 78)

72
Configure Map Fix menu. Finally, press EXIT to erase this menu. Now
press
↑ to
C
OORD
S
YSTEM
| ENT , select M
AP
F
IX
from the list and press
ENT | EXIT . All position information now shows as a distance from the
reference point you chose.
Customize Page Displays
The Status, Navigation, and Map pages all have customizable options.
These options decide which information is viewable on each page.
Customize Satellite Status Page
While on the Satellite Status Page, press
MENU |
↓ to
C USTOMIZE
| ENT .
Press
↓ or ↑ to select a display option window. With the display window
highlighted and flashing, press ENT to open a list of options. Scroll
↑
and
↓ to select a different display option, then press
ENT . After all op-
tions are set, press EXIT to return to the page display.
Customize Navigation Page
While on the Navigation Page, press
MENU |
↓ to
C
USTOMIZE
| ENT . Press
↓
or
↑ to select a display option window. With the display window high-
lighted and flashing, press ENT to open a list of options. Scroll
↑ and ↓
to select a different display option, then press ENT . After all options are
set, press EXIT to return to the page display.
Customize Map Page
While on the Map Page, press
PAGES |
↓ or ↑ to select Option
Name|
ENT .
DGPS Status
The DGPS Status screen shows whether DGPS is off or on, and it de-
scribes the quality of the DGPS signal. This screen is useful if you have
to diagnose a DGPS problem.
1. Press MENU | MENU |
↓ to
GPS S
ETUP
| ENT |
↓ to
DGPS S
TATUS
| ENT .
2. The DGPS Status screen is displayed. To return to the previous page,
press
EXIT | EXIT | EXIT .
GPS Simulator
The GPS simulator lets you use the unit as if you were outdoors navi-
gating somewhere. It's a great way to practice using your unit. You can
set the starting location by entering latitude/longitude (Starting Posi-
tion) or from a stored waypoint, map place or POI location (
C HOOSE S TART
command). You can steer your position and change speed on the map by
using the arrow keys (
S TEER WITH A RROWS
command) or by setting the track
and speed in the dialog boxes provided on the simulator menu screen.